Friday, 28 June 2013

3DPF Project 2

3DPF Project 2

Project 2 part 1: Standard walk cycle of Mani man

I followed the tutorial pdf file to animate human walk, after this exercise, i was already familiar to control the body parts of Mani man and know which body parts are important to contribute a good and natural walking. It is also a preparation to do my own Mani walk in Project 2 part 2.


Set keys for cog and edit its curve in animation editor to make the cog move more smoothly



Foot only walk forward or backward, so need to edit in the animation editor and to make liner curve



For more natural walking, legs should not move in a perfectly straight line, set keys for translate x of foots and cog, then edit curves in animation editor



Every steps for Mani is needed to twist its pelvis forward to match the forward leg and key, set keys of translate x y z of pelvis then edit curves in animation editor.






Also set keys for lumbar and thorax, neck and head, elbow to make Mani walking more natural







Project 2 part 2: Emotional walk cycle of Mani man




Firstly i set keys of cogs and foots, because i need to show happy walk, Mani legs jump up before walk forward, so there is two high points for each foot, same as the cog.Later edit at animaition editor to smooth the curves.



For showing how happy when Mani walking, Mani should be so relaxed and his hands spread out and is slow in motion, set tranlate z to spread hands and edit curve in animation editor 



Mani is relaxed and swing back and forth, every time he jump, his wrist will suddenly bend backwards, at the same time, he also will spread out his fingers to show how free he is.After set keys for both body parts, i need to edit in the animation editor to make movement more smoothly. 


set keys for the head ,it should swing side to side to show happy and pride.


 Every time he jump, his spine is bent backwards to show confidence.Go smooth curves in animation editor.






Reflection

After this project, i have been trained to do basic human walk and emotional walk, i found a lot of fun doing emotional walk, because i feel free to control the robot body to what i want it to be. I also have learnt that to make walk emotional is not simply only move up legs or hands, there are so many body parts need to be considered and then join them together, like controlling fingers and toes, swing head to show happy and relax, bent spine to show confidence. For the emotional walk, i feel i still have a lot of space to improve, when legs jump up, Mani looks not relax enough and movement is also look a little unnatural. When his arms swing back and forth, the movement should be more slow and flexible. I should have spent more time on smooth curves in animation editor for better walking result.The part i was confident is his fingers, they looks really relax, when his fingers spread out and swing up, i can see he is in good mood now. Even thought my works maybe not good enough, i was satisfied what i have learnt during this project. I hope i still have this training next time.



Thursday, 27 June 2013

Week 8 : Walk Cycle & Run Cycle

For this lab, i did the  1. walk cycle exercise




Firstly i need to think the walking steps and set time line, properly set keys for rootControl and footControl to create a basic walk cycle.



For character walks more naturally, its legs need to face outwards when it walks. i need to change Rotate Y of footControl from Animation Editor.




When character walks, the pelvis sways to the left and right to keep the body balanced, so i need to move the pelvis side to side and the same time rotate it, so set keys for Translate X and Rotate Z of rootControl, later edit curve in the Animation Editor for making walking more natural.




2. Run cycle

                       
Set up timeline and set keys for footControl and rootControl



After finished basic running cycle, edit attributes in animation editor to make movement more smoothly.


When character is running, rotate and move the pelvis side to side to make running looks more natural


  
                       


 Reflection

After this exercise, i learnt that making good walk cycle animation, every part of body effects to the naturalness of walking. It is also important to enhance in the animation editor each time to make movement more smoothly.








Week 7: Animation - Big Dog

Exercise 1

i) If engineered or programmed badly, BigDog would fall over. Watch the full video again, and describe how BigDog’s legs move while walking– ie. what is the sequence of leg movements for one complete step? Use the terms BL, BR, FL, and FR for the back-left, back-right, front-left and front-right legs.

The sequence of leg movements for one complete step is FR , BL , FL , BR.

ii) Explain how this sequence of movements manages to balance BigDog’s body weight.

The sequence of leg movements for one complete step is FR , BL , FL , BR. When BigDog fall over, its front right leg spread wide then its back left leg crosses with back right leg to keep balance, and this moment the most of weight is pressed on front right leg. When the weight is too huge and its right front leg already can not bear any longer, its front left leg move toward right leg and crosses right leg to continue keeping balance, and its back right leg start spreading wide to bear part of its weight, so its body is not falling over easily.

iii) Look at BigDog_kick_slow_motion.mov. Draw a storyboard of BigDog stabilising itself after being kicked. 




Exercise 2

i) Try to animate BigDog maintaining balance after being kicked.



Create a movement from left to right for big dog and edit to curve movement in Graph Editor.





translate X Y Z to spread wide front right leg, front left leg and back right leg stay same position.Then back legs crossed.


translate X Y Z to spread wide back right leg, front right leg and back left leg stay same position.Then front legs crossed.


Rotate BigDog body to create a falling effect.


                             


Reflection

After this exercise, i learnt that i need to carefully observe every detail of character's movement. Then it would be better to draw a storyboard of its movement and think the sequence for each different move from character.After prepare these, i was more clear to decide animation timeline and set keys in right place.When i was doing a falling effect to the BigDog's body, i found hard to rotate it to the right time, so the falling movement looks a little bit unnatural. i know there is still a lot of space for me to practice and develop, look forward the exercises in the next lab.





Tuesday, 25 June 2013

Week 6: Spiderman poses

During the lab, we learnt to pose spider man.
This is the pose that lab give, and is quite difficult one for me.

Upside down pose


twist leg


twist arm



add image plane

Upside down pose


Later i search another two poses from website, they are easier than the upside down pose.

Pose 1





Pose 2






Reflection

After this exercise, i learnt that character posing need patience, sometime i try to adjust attributes many times but character pose just different from what i want it to be.For the hard character pose, i need to think carefully how its body move, and each body part work.Then i can take clear steps to adjust each attribute,make the pose right. For the Pose 2 i found quite hard to pose right leg, the right leg pose is also a little different from the sample picture.When i move  foot up to make knee bent more so spider man could pose like squat, but then the leg twist around and found hard to fix its position. I feel i still need more practice for work better on posing. It also give a lot of fun when i pose what i want and it also give a lot of space for me to freely adjust and play my ideas.



Friday, 7 June 2013

Project 1: Final Video - Reflection

Project 1: Final Video - Reflection


       


After this project, i have been more familiar with After effect and Maya.In this project i did modeling and texture, this also help me review what i have learnt from last 3D project and MGE project.When i creating effects, I have met many difficulties when i was doing wall crack, but more important i have found more mistakes i made, it helped me to Accumulate experience of using After Effect.It is also my first time filming stop motion, it is fun that shooting with group mate, let me know the importance of cooperating and communicating with people in teamwork, because i realized the lack of communication may slowed progress of project, but I believe i can do better next time if i take these mistake and correct it.

Project 1 : Online Security


3D Production Project 1: Online Security

Our group decided to make a stop motion film as our 3D Production project , because we think stop motion film  can make our video stand out as its own special work of art .The main scene of this video is the Lego world we built, There is Lego house, Lego man, even though make stop motion film is time-consuming work , but we believe it is a right choice to complete this Lego man story.

Our video  is made to send a message :  Stop Neglect, Protect Before You Connect.

Our story is about a Human computer human take a box falling from the sky to his home. During he is sleeping, his body is attacked by virus flying out from the box,then he has magic power and destroy everything.


It is not simple to complete an animation film because it needs a step by step process. Before started filming we still have a lots of things need to prepare like writing story, draw storyboard, doing production pipeline and planning project schedule, so it is important for the project to group together, everyone responsible for their part to make process of project work faster and steady, we all also found the importance of communication between members in doing group work.
Here are some processes of making stop motion film:




It is not easy to make stop motion film, and our first try didn't work out, this is the video cut we give up because we didn't prepare enough that time.


After this try, wee learnt that making stop motion film not only need help of basic equipment, but also our patience and cooperation. At the second filming we succeeded and finished shooting. Here is our final video.


                  


Reflection
We found the most problematic part is control the Lego man’s hand in every picture shooting  , during the film , we often re shot because of the background that have very light or dark color. It is also hard for photographer(Pei Zhen ,Cindy) to continuously shoot images, even thought we prepare the tripod to stabilize camera, but in the final video we still found that pictures are not linked together very well , the light for each picture are also slightly different. However after this filming, we have more experience in making stop motion film and know what mistaken we need avoid.


After we finished stop motion film, we started adding effects for the video. Here are the list of effects I applied to the video:

1.       Ground Crack
2.       Wall Crack
3.       Glass Shatter


Ground Crack

When the box drops to the ground, I need to do the Ground Crack effect. This is the YouTube tutorial I found for the ground crack effect:

http://www.youtube.com/watch?v=-tb0C6oPBFg

From the video, I need to find some ground crack footage. Then this is the website I download ground crack footage:

http://botevgrad.org/Ivo/Video%20Edit/Action%20Essentials%202/Action_Essentials_720p/20.%20Textures/Cracks/


My first step is to add downloaded footage to the video, add ground crack effect when the box drops to the ground, because our character: Lego man are picking up the box then walking on the cracking ground, so I need to continue adding ground crack footage to pictures one by one, sometimes I need to change different footage when the shooting angle changed.


                       





When lego man is walking on the cracking ground, its body is supposed to cover the footages, so I need to do the lego man body masking to put its body in front of the ground crack footage for each walking picture. I also did the same to the flowers because they also cover the cracking footage in the video.



                                


Here is the video cut that Lego man is walking on the ground





For making scene more real, I download another footage (http://www.videocopilot.net/tutorials/dynamic_machine_gun/ ) to add dust effect when the box drops to the ground, this will give a falling strength of box. Then I adjust color of the footage to fit green ground for adding more details.
When the box drops to the ground, I want to add more impact result when the box hitting the ground, so I slightly change video position in each frame, make whole scene shake to give a strong impact on hitting ground.





Wall Crack
When the virus get in the lego man’s body, everything is destroyed. Before the house exploded, I need to add cracking effect on the wall. Not like the way I did ground crack, wall crack effect needs shows the slow process of cracking.
I found a Maya tutorial from this link:
First I need to create 4 crack shapes, select polygons/create polygon tool draw 4 crack plane.




After finishing drawing, it’s time to extrude each face, select Edit Mesh/Extrude

                    


Now these 4 parts start cracking, I need to make walls bend to create cracking motion, select deform/create nonlinear/bend to bend each part.





Making animation: Big crack appeal first, so Adjust position and curvature of main two sides first. Small crack comes later, adjust position and curvature of each part.




After finishing cracking animation, I need to create a polygon plane as animation background and color it. I also found wall texture from website and assign to the wall.




Here is my final animation:


                        


Window scene
After showing the details of cracking, scene will back to the window scene, many cracks will slowly appeal in the wall. For doing this, I download a wall picture and draw many cracks on it in Photoshop .



I will do the same way that I did for the ground crack, create masking for each cracks, let them slowly show on the wall.



Here is the final video cut of wall crack





Glass shatter
After wall cracks, scene will be zoomed in to the window, glasses shatter. This is the YouTube tutorial I found for the Glass Shatter effect:

Create new layer on the video, add color and adjust opacity to make a glass plane.
Select  Effect > Simulation > Shatter  to create glass shatter effect

Here is the final video cut: